FreshTomato Wiki

User Tools

Site Tools

Trace:
advanced-pbr

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
advanced-pbr [2023/06/05 03:17] – [MultiWan Routing] -condense hogwildadvanced-pbr [2024/11/27 01:23] (current) – [Rules] hogwild
Line 1: Line 1:
-===== MultiWan Routing =====+====== MultiWAN Routing ======
  
 While somewhat similar to the Routing menu, the MultiWAN Routing menu allows you to direct outbound traffic in multiwan scenarios. While somewhat similar to the Routing menu, the MultiWAN Routing menu allows you to direct outbound traffic in multiwan scenarios.
  
-This menu lets you define advanced parameters to make a connection bind to a specific WAN. Where outbound traffic is directed will implicitly affect the corresponding (inbound) return traffic. A packet going to WAN0 should return only via the same interface.+Here, you can define advanced parameters to make a connection bind to a specific WAN interface. Where outbound traffic is directed will implicitly affect the corresponding (inbound) return traffic. A packet going to WAN0 should return only via the same interface.
  
  
-=====  Rules =====+===== Rules =====
  
 {{:pasted:20220126-181958.png}}\\  \\ {{:pasted:20220126-181958.png}}\\  \\
  
-**On**: When checked, this enables the routing rule on that line of the table.+**On**: when checked, this enables the routing rule on that line of the table.
  
-**Protocol**:  This lets you choose the transport protocols that will be matched by the rule. There are hundreds of layer 4 protocols. This menu and setting refer to only the most common ones.+ \\ 
 + 
 +**Protocol**: lets you choose the transport protocols to be matched by the rule. 
 + 
 +Hundreds of L4 protocols exist. This setting refers to the most common ones.
  
   * All Protocols * (Default).   * All Protocols * (Default).
-  * TCP+UDP+  * TCP + UDP
   * TCP   * TCP
   * UDP   * UDP
   * ICMP   * ICMP
  
-**Source Address**:  Filters in the defined source of traffic. All filters in all LAN devices. The IP setting allows you to define a specific IP address or set of addresses using a netmask syntax (e.g. 192.168.1.0/24), where MAC binds the rule to a defined MAC Address only.+ \\ 
 + 
 +**Source Address**: filters in the defined source of traffic. 
 + 
 +  * All - filters in all LAN devices. 
 +  * IP - lets you define a specific IP address or set of addresses. \\ using a netmask syntax (e.g. 192.168.1.0/24). 
 +  * MAC - binds the rule to a defined MAC Address only. 
 + 
 + \\ 
 + 
 +**Destination Address**: Similar to //source address//, but makes a more restrictive rule, based on destination address. 
 + 
 +  * All - all IP Addresses on the Internet. 
 +  * IP - one ore more IP Addresses (in netmask format). 
 +  * Domain - a destination domain. 
 + 
 + \\
  
-  * All +**Select WAN**: (WANx) - here, choose the logical interface where defined outbound traffic will be directed.
-  * IP +
-  * MAC+
  
-**Destination Address**:  Similar to the source IP, the destination address makes the rule more restrictive based on/or destination address. This can be defined as ALL (as in Internet), IP address or set of addresses, defined in a netmask format or even a destination domain.+ \\
  
-  * All +**Description**: in this field, enter any notes to help you make management easier.\\
-  * IP +
-  * Domain+
  
-**Select WAN**:  (WANx) - This specfies the logical interface where the defined outbound traffic will be directed.+ \\
  
-**Description**: In this field, you can enter any notes you wish to make management easier.\\+Note that Rules defined will take precedence over any WAN's weight-related setting.
  
-Rules defined will take precedence over any WAN's weight-related setting.\\+ \\
  
  
advanced-pbr.1685931456.txt.gz · Last modified: by hogwild

Page Tools

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki