Differences

This shows you the differences between two versions of the page.

--- advanced-pbr [2022/01/31 23:45] – hogwild
+++ advanced-pbr [2023/06/10 17:27] (current) – [MultiWan Routing] -change title to "MultiWAN" hogwild
@@ Line 1: / Line 1: @@
-===== MultiWan Routing =====
+===== MultiWAN Routing =====
-While similar to the Routing menu, the MultiWAN Routing menu allows you to direct outbound traffic in multiwan scenarios. On this menu, you can define advanced parameters to make a connection bind to a specific WAN. Where outbound traffic is directed will implicitly affect the corresponding (inbound) return traffic. A packet going to WAN0 should return only via the same interface.
+While somewhat similar to the Routing menu, the MultiWAN Routing menu allows you to direct outbound traffic in multiwan scenarios.
- \\
+This menu lets you define advanced parameters to make a connection bind to a specific WAN. Where outbound traffic is directed will implicitly affect the corresponding (inbound) return traffic. A packet going to WAN0 should return only via the same interface.
+===== Rules =====
 {{:pasted:20220126-181958.png}}\\  \\
-**On**: When enabled, makes active the routing rule on that line of the table.
+**On**: When checked, this enables the routing rule on that line of the table.
-**Protocol**:
+**Protocol**:  This lets you choose the transport protocols that will be matched by the rule. There are hundreds of layer 4 protocols. This menu and setting refer to only the most common ones.
   * All Protocols * (Default).
@@ Line 17: / Line 20: @@
   * ICMP
-This dropdown lets you choose the transport protocols that should be matched by the rule. Note that there are hundreds of layer 4 protocols. This menu and setting refer to only the most common ones.
+**Source Address**:  Filters in the defined source of traffic. All filters in all LAN devices. The IP setting allows you to define a specific IP address or set of addresses using a netmask syntax (e.g. 192.168.1.0/24), where MAC binds the rule to a defined MAC Address only.
-**Source Address**:
   * All
@@ Line 25: / Line 26: @@
   * MAC
-Filters in the defined source of traffic. All filters in all LAN devices. The IP setting allows you to define a specific IP address or set of addresses using a netmask syntax (e.g. 192.168.1.0/24), where MAC binds the rule to a defined MAC Address only.
+**Destination Address**:  Similar to the source IP, the destination address makes the rule more restrictive based on/or destination address. This can be defined as ALL (as in Internet), IP address or set of addresses, defined in a netmask format or even a destination domain.
-**Destination Address**:
   * All
@@ Line 33: / Line 32: @@
   * Domain
-Similar to the source IP, the destination address makes the rule more restrictive based on/or destination address. This can be defined as ALL (as in Internet), IP address or set of addresses, defined in a netmask format or even a destination domain.
+**Select WAN**:  (WANx) - Here, you choose the logical interface where the defined outbound traffic will be directed.
-**Selected WAN**: WANx - Specfies the logical interface where the defined outbound traffic should be directed.
+**Description**: In this field, you can enter any notes you wish to make management easier.\\
-**Description**: This is a free text field, in which you can enter any notes you choose to make management easier.\\
+Rules defined will take precedence over any WAN's weight-related setting.
+ \\
-Please note that the rules defined will take precedence over any WAN's weight-related setting.\\
+ \\ \\

FreshTomato Wiki

User Tools

Site Tools

Differences

Page Tools