Differences

This shows you the differences between two versions of the page.

--- advanced-routing [2024/10/07 02:28] – hogwild
+++ advanced-routing [2024/10/13 00:41] (current) – -Tag relevant subheads as Head2 hogwild
@@ Line 1: / Line 1: @@
-===== Routing =====
+====== Routing ======
 In this menu, you can view the current routing table. You can also define the output interface for specific routing destinations (IP addresses and Subnets).
  \\
+===== Current Routing Table =====
 {{:pasted:20220110-191350.png}}
@@ Line 11: / Line 13: @@
 The Current Routing Table displays the output from the ''route'' system command.
-A default table entry should be present that indicates traffic going towards the Internet.\\  \\
+A default table entry should be present that indicates traffic going towards the Internet.
  \\
- \\
+===== Static Routing Table =====
 {{:pasted:20220110-191557.png}}
- \\ The Static Routing Table is manually created. Here, you can define static routes (with their netmask/gateway) towards specific destinations. While not often needed on simple networks, this can be useful for advanced setups like intranets, VPNs, and others.\\  \\
+ \\ The Static Routing Table is manually created. Here, you can define static routes (with their netmask/gateway) towards specific destinations. While not often needed on simple networks, this can be useful for advanced setups like intranets, VPNs, and others.\\
- \\
+===== Miscellaneous =====
 {{:pasted:20220110-191807.png}}
  \\
- \\
-If the WAN interface receives an IP address via DHCP, this option specifies whether to accept routing information from the DHCP server. Such information is sent usually via DHCP option 33 or 121.
+If the WAN interface receives an IP address via DHCP, this specifies whether to accept routing information from the DHCP server. Such information is sent usually via DHCP option 33 or 121.
- \\ On older releases, there was an obsolete setting in this menu, suggesting FreshTomato could operate in Gateway mode or Router mode. Ignore this, and leave it set to "Gateway", regardless of your configuration.
  \\
-[[https://wiki.freshtomato.org/lib/exe/detail.php?id=basic&media=a16bb07aecd3c3d8967615c6fef64760.png|{{:a16bb07aecd3c3d8967615c6fef64760.png}}]]
+ \\ [[https://wiki.freshtomato.org/lib/exe/detail.php?id=basic&media=a16bb07aecd3c3d8967615c6fef64760.png|{{:a16bb07aecd3c3d8967615c6fef64760.png}}]]
- \\
+ \\ There was an obsolete setting on older releases in this menu for "Gateway mode" or "Router mode". Ignore this, and leave it set to "Gateway", regardless of your configuration.
  \\ \\

FreshTomato Wiki

User Tools

Site Tools

Differences

Page Tools