Differences

This shows you the differences between two versions of the page.

--- advanced-wlanvifs [2023/06/18 23:03] – hogwild
+++ advanced-wlanvifs [2024/11/27 01:34] (current) – [Virtual Wireless Notes and Troubleshooting] hogwild
@@ Line 1: / Line 1: @@
 ====== Virtual Wireless ======
-The Virtual Wireless menu allows you to create and modify virtual wireless interfaces for virtual wireless networks. This is useful for creating things like guest networks, (for questionable/unfamiliar users). It's also useful for creating  separate networks for IoT (Internet of Things) devices. IoT devices are often untrusted in terms of security.
+Here, you can create and modify virtual wireless interfaces for virtual wireless networks. This is useful for creating things like guest networks (for questionable/unfamiliar users). You can also create separate networks for IoT (Internet of Things) devices. IoT devices are often untrusted in terms of security. Some infringe upon your privacy.
 ===== Virtual Wireless Interfaces =====
-Clicking on any of the tabs in the Virtual Wireless Interfaces section displays the configuration/settings for that interface.
+In this table, you can add, remove or modify virtual wireless interfaces (VIFs). Clicking on any of the tabs in the Virtual Wireless Interfaces section displays the configuration/settings for that interface.
+ \\ {{advanced-virtual wireless-interfaces.png?915}}
  \\
-{{:virtual_wireless.jpg?808}}
+**Interface: **here, enter the name of the wireless VIF (Virtual Interface) in that row.
  \\
-**Interface: **The wireless VIF (Virtual Interface) name
+**Enabled: **checking this enables or disables the VIF in that row.
-**Enabled:  **Whether this VIF should be active and brought online
+ \\
-**SSID:  **The wireless Service Set Identifier
+**SSID: **here, enter the the wireless Service Set Identifier of the VIF in that row.
-**Mode:  **Allows selection of the wireless Interface's mode:
+ \\
+**Mode: **here, you can select the wireless interface's mode:
+ \\
   * Access Point
@@ Line 27: / Line 34: @@
   * WDS
   * Media Bridge
+ \\
 For details on Wireless modes, please see the "Wireless Mode" tables on the [[basic-network|Network]] wiki page.
@@ Line 32: / Line 41: @@
  \\
-**Bridge:**  Allows you to select to which LAN bridge this VIF should be assigned.
+**Bridge:**  allows you to select to which LAN bridge this VIF should be assigned.
-Virtual wireless networks share the same radio as their corresponding main wireless interface. Thus, for any virtual wireless network you want to enable, you must ensure the corresponding, shared main interface is enabled. For example, to enable VIF wl0.1, the main wireless interface wl0 must be enabled. The opposite, is not true. Turning off a corresponding VIF has no effect on the on/off status of the corresponding main interface.
+VWLANs share the same radio as their corresponding main wireless interface. Thus, to enable any virtual wireless network, the corresponding, shared main interface must be enabled. For example, to enable VIF "wl0.1", the main wireless interface wl0 must be enabled. The opposite is not true. Turning off a corresponding VIF has no effect on the on/off status of the corresponding main interface.
-Physical wireless interfaces are listed as wl0, wl1, wl2, and so on. An alias (like for physical interfaces) is identified by a period (".") and "reference number" , such as wl0.1, wl0.2 and so forth. For example, in the image above, the virtual network wl0.1 (sharing the 2.4 GHz radio) has SSID name "Guest24". The virtual network wl0.2 (sharing the 5 GHz radio) has SSID name "Guest50".
+Physical wireless interfaces are listed as wl0, wl1, wl2, and so on. An alias (like for physical interfaces) is identified by a period (".") and "reference number", such as "wl0.1", "wl0.2" and so on. For example, in the image above, the virtual network "wl0.1" (sharing the 2.4 GHz radio) has SSID name "Guest24". The virtual network "wl0.2" (sharing the 5 GHz radio) has SSID name "Guest50".
-The more virtual interfaces there are, the more possible SSIDs you get and the less throughput is available to each client. However, the performance difference is barely noticeable for up to 4-5 virtual SSIDs.
+The more virtual interfaces there are, the more possible SSIDs there are and the less throughput is available to each client. However, the performance difference is barely noticeable with up to 4-5 virtual SSIDs.
-**WFilter:**  Here, you can enable/disable Wireless MAC address filtering for the VIF on that line, similar to that in the [[basic-wfilter|Wireless Filter]] menu.
+ \\
-===== Virtual Wireless Notes =====
+**WFilter:** here, you can enable/disable MAC address filtering for the VIF on that line.
-**Warning!** Avoid using virtual interfaces on an interface in Wireless Ethernet Bridge or Media Bridge mode due to possible problems.
-When you create/define a new wireless VIF (Virtual interface), its MAC Address will be shown (incorrectly) as "00:00:00:00:00:00", as it is unknown at that moment. The MAC Address will display correctly as soon as the network is restarted and the menu is refreshed.
+===== Virtual Wireless Notes and Troubleshooting =====
-When saving changes, the MAC Addresses of all defined non-primary wireless VIFs could sometimes already be set, but might be recreated by the wl driver (Broadcom's proprietary wireless LAN driver). Thus, previous settings may need to be updated/changed accordingly in the [[:mac_address|MAC Address]] menu after saving settings and rebooting the router.
+**Warning!** Avoid using VIFs on an interface configured in Wireless Ethernet Bridge or Media Bridge mode. It can cause problems.
-FreshTomato's web interface allows you to configure a maximum of 4 VIFs for each physical wireless interface available. You can define up to 3 extra VIFs in addition to the primary VIF (on devices with multiple VIF capabilities).
+When you create/define a new wireless VIF (Virtual interface), its MAC Address will be incorrectly shown as: "00:00:00:00:00:00", because it's unknown at that moment. The MAC Address //will// display correctly as soon as the network is restarted and the menu refreshed.
-You should not change configuration settings for the primary VIF of any physical wireless interfaces in this menu. For that, use the [[basic-network|Network]] page instead.
+When saving changes, the MAC Addresses of all defined non-primary wireless VIFs might sometimes already be set, but might be recreated by the wl driver (Broadcom's proprietary WiFi driver). In such cases, previous settings might need updating accordingly in the [[:mac_address|MAC Address]] menu after saving settings and rebooting.
+The web interface lets you configure a maximum of 4 VIFs for each physical WiFi interface. On devices with multiple VIF capabilities, In addition to the primary VIF, you can define up to 3 extra VIFs.
+Do not change configuration settings for the primary VIF of any physical wireless interfaces in this menu. For that, use the [[basic-network|Network]] menu.
+ \\
  \\

FreshTomato Wiki

User Tools

Site Tools

Differences

Page Tools