Differences

This shows you the differences between two versions of the page.

--- bwm-realtime [2024/05/07 03:12] – old revision restored (2023/06/16 02:51)-condense, grammar, formatting hogwild
+++ bwm-realtime [2024/05/07 03:13] – old revision restored (2023/06/16 02:51) hogwild
@@ Line 11: / Line 11: @@
 \\ Some possible FreshTomato interfaces are (depending on firmware release and mode):
-  **vlan2:**  The wired WAN port on the router
+  * **vlan2:**  The wired WAN port on the router
-  ***vlan1:**  The wired LAN ports on the router
+  * **vlan1:**  The wired LAN ports on the router
-  ***eth0:**    All Ethernet ports on the router
+  * **eth0:**    All Ethernet ports on the router
-  ***eth1:**    The Wireless 2.4 GHz radio
+  * **eth1:**    The Wireless 2.4 GHz radio
-  ***eth2:**    The wireless 5 GHz (if equipped) radio
+  * **eth2:**    The wireless 5 GHz (if equipped) radio
-  ***br0:**     The software bridge corresponding to vlan1, eth1, eth2. (or "The LAN")
+  * **br0:**     The software bridge corresponding to vlan1, eth1, eth2. (or "The LAN")
-\\ **Avg.** applies a percentile to the image. This shows how a data point compares to the total distribution over time.
+\\ **Avg.** This applies a percentile to the image. This shows how a data point compares to the total distribution over time.
 **Max:**
-  *Uniform - scales graphs to the maximum value recorded on all interfaces.
+  * Uniform - Choosing this scales graphs to the maximum value recorded on all interfaces.
-  *Per If (Per Interface) - scales graphs based on data from one interface only.
+  * Per If (Per Interface) - Choosing this scales graphs based on data from one interface only.
 **Unit: **
-  *kbit/KB - toggles between displaying volume in kilobits/Kilobytes (1,000).
+  * kbit/KB - This toggles between displaying volume in kilobits/Kilobytes (1,000).
-  *Mbit/MB - toggles the display to volume expressed in megabits/Megabytes (1,000,000).
+  * Mbit/MB:This toggles the display to volume to be expressed in megabits/Megabytes (1,000,000).
 **Display: **
-  *Solid - graphs bandwidth usage with a solid area.
+  * Solid - Choosing this option graphs bandwidth usage with a solid area.
-  *Line - graphs bandwidth using a single line representing maximum values.
+  * Line - Choosing this option graphs bandwidth using a single line representing maximum values.
-**Color**: switches between various pre-specified color schemes for the graph.
+**Color**: Thus switches between various pre-specified color schemes for the graph.
-**[reverse]** : reverses the graph's color scheme. So, a device traced in blue is traced in orange and vice versa.\\  \\  \\  [[https://wiki.freshtomato.org/lib/exe/detail.php?id=real-time&media=pasted:20200520-162850.png|{{:pasted:20200520-162850.png?729}}]]
+**[reverse]** : This reverses the graph's color scheme. For example, a device traced in blue is traced in orange and vice versa.\\  \\  \\  [[https://wiki.freshtomato.org/lib/exe/detail.php?id=real-time&media=pasted:20200520-162850.png|{{:pasted:20200520-162850.png?729}}]]
  \\
-//Cursor-Tracking Readout: //Bandwidth graphs have a a //Cursor-Tracking Readout//. Moving your mouse cursor over the graph with cause the graph to display the following at the top right:
+//Cursor-Tracking Readout: //Bandwidth graphs feature a a //Cursor-Tracking Readout//. When you move your mouse cursor over the graph, the graph displays the following at the top right corner:
-  * Day of the Week
+  * Day of Week
   * Time
   * Bandwidth usage.
- \\
 These update as you move your mouse.
-The //Cursor-Tracking Readout// disappears after 5 intervals: that is, 10 seconds in //Real-Time//, 10 minutes in //Last 24 Hours//, and so on.
+The Cursor-Tracking Readout disappears after 5 intervals: that is, 10 seconds in //Real-Time//, 10 minutes in //Last 24 Hours//, and so on.
 //Mouse-Click Readout//: Bandwidth graphs also feature a //Mouse-Click Readout//: If you click on the graph, the date/time/bandwidth numbers will display beside the mouse cursor.
-The Mouse-click readout is static. It does not update with graph movement or scaling.
+Note: Mouse-click readout is static. It does not update with graph movement or scaling.
  \\

FreshTomato Wiki

User Tools

Site Tools

Differences

Page Tools