Differences

This shows you the differences between two versions of the page.

--- ipt-24 [2023/06/16 02:55] – -added "Do not confuse this with the..." warning hogwild
+++ ipt-24 [2024/11/06 22:53] (current) – [IP Traffic - Last 24 Hours] -Condense hogwild
@@ Line 2: / Line 2: @@
 The IP Traffic - Last 24 Hours menu displays bandwidth used on //selected //network IP addresses/ranges during the last 24 hours. Do not confuse this with the //Bandwidth///[[:bwm-24|Last 24 Hours]] function.
+ \\ \\ {{:299c6bc71fedfa913c910bf4f8e2a4ab.png?774}}  \\
  \\ **IPs currently on graphic:** allows you to select from which IP addresses/ranges you want to display bandwidth data.
-**Hidden Addresses:** In this menu, you can select IP addresses whose bandwidth is currently not displayed to be measured/graphed.
+ \\
+**Hidden Addresses:** lets you select IP addresses whose bandwidth currently isn't displayed to be measured/graphed.
-The graph has a 24-hour window with a 2-minute interval. Thus, a maximum of 24 hours of bandwidth data are displayed, refreshed a maximum of every 2 minutes.
+The graph has a 24-hour window with 2-minute interval. A maximum of 24 hours of data display, refreshed at most every 2 minutes.
  \\
 **RX** numbers show incoming bandwidth (to the LAN).
+ \\
 **TX** numbers show outgoing bandwidth (to the WAN).
-\\ [[https://wiki.freshtomato.org/lib/exe/detail.php?id=ip-last_24_hours&media=299c6bc71fedfa913c910bf4f8e2a4ab.png|{{:299c6bc71fedfa913c910bf4f8e2a4ab.png?774}}]] \\  \\  \\
+ \\
-**Hours:**
+**Hours: **
-**Avg:**  This applies a percentile to the image. This shows how a data point compares to the total distribution over time.
+ \\
+**Avg:**  applies a percentile to the image. It shows how a data point compares to the total distribution over time.
+ \\
 **Max:**
-  * Uniform - Choosing this scales graphs to the maximum value recorded on all interfaces.
+  * uniform - choosing this scales graphs to the maximum value recorded on all interfaces.
-  * Per If (Per Interface) - Choosing this scales graphs based on data from one interface only.
+  * per If (Per Interface) - choosing this scales graphs based on data from one interface only.
+ \\
 **Unit: **
-  * kbit/KB - This toggles between displaying volume in kilobits/Kilobytes (1,000).
+  * kbit/KB - this toggles between displaying volume in kilobits/Kilobytes (1,000).
-  * Mbit/MB - This toggles the display to volume to be expressed in megabits/Megabytes (1,000,000).
+  * Mbit/MB - this toggles the display to volume to be expressed in megabits/Megabytes (1,000,000).
+ \\
 **Display: **
-  * Solid - Choosing this option graphs bandwidth usage with a solid area.
+  * Solid - choosing this graphs bandwidth usage with a solid area.
-  * Line - Choosing this option graphs bandwidth using a single line representing maximum values.
+  * Line - graphs bandwidth using a single line to represent maximum values.
-**Color:**  This switches between various pre-specified color schemes for the graph.
+ \\
-**[reverse]:** This reverses the graph's color scheme. For example, a device traced in blue is traced in orange and vice versa.
+**Color:**  switches between various pre-specified color schemes for the graph.
+**[reverse]:**  reverses the graph's color scheme. For example, a device traced in blue is traced in orange and vice versa.
  \\
-**Configure:** Clicking this takes you to the Administration/[[admin-iptraffic|IP Traffic Monitoring]] menu. There, you can enable/disable IP Traffic monitoring, and configure settings.
+**Configure:** clicking this takes you to [[admin-iptraffic|IP Traffic Monitoring]]. There, you can enable/disable IP Traffic monitoring, and configure settings.
  \\
+==== General Features ====
 //Cursor-Tracking Readout: //Bandwidth graphs feature a a //Cursor-Tracking Readout//.
@@ Line 53: / Line 72: @@
   * Time
   * Bandwidth usage.
+ \\
 These update as you move your mouse.

FreshTomato Wiki

User Tools

Site Tools

Differences

Page Tools