IP Traffic - Real-time

The IP Traffic - Real-Time menu displays real-time bandwidth being used on selected network IP addresses/ranges.

IP Traffic Monitoring is similar to Bandwidth Monitoring, but it categorizes the data by individual LAN IP address.

Don't confuse it with the /Bandwidth/Real-Time function. That tracks bandwidth usage based on specific FreshTomato interfaces.

The graph has: a 10-minute window and 2-second interval.

It displays a maximum of 10 minutes of data, refreshed a maximum of every 2 seconds.

IPs currently on graphic: lets you select the IP addresses/ranges whose bandwidth data to display.

Hidden Addresses: select IP addresses whose bandwidth isn't displayed to be measured/graphed.

RX: numbers show incoming bandwidth (to the LAN).

TX: numbers show outgoing bandwidth (to the WAN).

Hours: TBD.

Avg: Applies a percentile to the image to show how a data point compares to the total distribution over time.

Max:

• Uniform - scales graphs to the maximum value recorded on all interfaces.
• Per If (Per Interface) - scales graphs based on data from one interface only.

Unit:

• kbit/KB - toggles between displaying volume in kilobits/Kilobytes.
• Mbit/MB - toggles the display volume to be expressed in megabits/Megabytes.

Display:

• Solid - graphs bandwidth usage with a solid area.
• Line - graphs bandwidth using a single line representing maximum values.

Color: switches between various pre-specified color schemes for the graph.

[reverse]: Reverses the graph's color scheme.

A device traced in blue would be traced in orange and vice versa.

>> Configure: Takes you to the /Administration/IP Traffic Monitoring menu. There, you can
enable/disable IP Traffic monitoring, and configure settings.

Cursor-Tracking Readout

Bandwidth graphs feature a a Cursor-Tracking Readout.

When you move your mouse over the graph, the graph displays at the top right corner:

• Day of Week
• Time
• Bandwidth usage.

These data update as you move your mouse.

The Cursor-Tracking Readout disappears after 5 intervals: that is, 10 seconds in Real-Time, 10 minutes in Last 24 Hours, and so on.

Mouse-Click Readout:

Bandwidth graphs have a Mouse-Click Readout: If you click on the graph, the date/time/bandwidth numbers display beside the mouse cursor. The readout is static. It does not update with graph movement or scaling.