Site Tools


nas-bittorrent

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
nas-bittorrent [2024/11/27 19:23] – [BitTorrent client (Transmission)] hogwildnas-bittorrent [2024/11/27 19:45] (current) – [Advanced Settings] hogwild
Line 7: Line 7:
  \\  \\
  
-{{:pasted:20220222-124628.png}}  \\+{{:pasted:20220222-124628.png}}  \\  \\
  
-**Enable:** checking this/Save immediately runs the Transmission process and starts it at each boot. \\  \\+**Enable:** checking this/Save immediately runs Transmission and starts it at each boot. \\  \\ 
 + 
 + \\   \\ {{:pasted:20220222-124844.png}}
  
  \\  \\
  
-{{:pasted:20220222-124844.png}} +**Transmission binary path:** specifies the location of the Transmission binary.
- +
- \\ **Transmission binary path:** specifies where the Transmission binary can be found on the filesystem.+
  
   * Internal - causes FreshTomato's built-in binary to be used.   * Internal - causes FreshTomato's built-in binary to be used.
   * Optware - makes FreshTomato use an Optware/Entware \\ installation of Transmission. \\ FreshTomato will expect to find the binary in the: "opt/bin" directory.   * Optware - makes FreshTomato use an Optware/Entware \\ installation of Transmission. \\ FreshTomato will expect to find the binary in the: "opt/bin" directory.
   * Custom - lets you set a custom path to the binary location.\\   * Custom - lets you set a custom path to the binary location.\\
 +
 + \\   \\  **Click here to open Transmission GUI:** opens the administration GUI in a new browser tab.
  
  \\  \\
  
-**Click here to open Transmission GUI:** opens the administration GUI interface in a new browser tab. + \\ \\ {{:pasted:20220222-125424.png}}\\  \\
- +
- \\+
  
 **Keepalive:** performs "process keepalive" activity, and restarts Transmission if it's not running. **Keepalive:** performs "process keepalive" activity, and restarts Transmission if it's not running.
Line 31: Line 31:
   * **Check alive every:**  this value specifies how often Keepalive is performed.   * **Check alive every:**  this value specifies how often Keepalive is performed.
  
- \\ \\ {{:pasted:20220222-125424.png}}\\  \\  \\ **Delay at startup:** the time value defined here (seconds) will delay the running of the process at boot time.+ \\ 
 + 
 +**Delay at startup:** the time value defined here (seconds) will delay the running of the process at boot time.
  
 This can be useful when waiting for external storage to be fully ready for use. This can be useful when waiting for external storage to be fully ready for use.
Line 74: Line 76:
 ===== Limits ===== ===== Limits =====
  
-This section has settings to define resource limits. While most options are self-explanatory, consult official Transmission documentation for details. [[https://transmissionbt.com/|Transmission]]+Settings here define resource limits. While most options are self-explanatory, consult official documentation for details. [[https://transmissionbt.com/|Transmission]]
  
  \\  \\
Line 98: Line 100:
 Be selective with these settings. Some protocols don't work well through a VPN, or interrupt private peering. For best results, see the [[nas-bittorrent|Transmission]] documentation and perhaps generic Torrent protocol documentation.\\ Be selective with these settings. Some protocols don't work well through a VPN, or interrupt private peering. For best results, see the [[nas-bittorrent|Transmission]] documentation and perhaps generic Torrent protocol documentation.\\
  
- \\ + \\   \\
- \\ +
  
 {{:pasted:20220222-143953.png}}\\  \\ {{:pasted:20220222-143953.png}}\\  \\
  
-**Message level:** defines the lowest level of Transmission messages to be captured in the system logs:+**Message level:** defines the lowest level of Transmission messages to capture in the system logs:
  
   * None (0) - no Transmission messages will be stored in system logs.   * None (0) - no Transmission messages will be stored in system logs.
Line 110: Line 111:
   * Debug (7) -debugging level messages and higher will be stored \\ in system logs.\\   * Debug (7) -debugging level messages and higher will be stored \\ in system logs.\\
  
- \\ + \\   \\
- \\+
  
 {{:pasted:20220222-144357.png}}\\  \\ {{:pasted:20220222-144357.png}}\\  \\
Line 123: Line 123:
   * Custom -  \\   * Custom -  \\
  
- \\ + \\   \\
- \\ +
  
 {{:pasted:20220222-144747.png}}\\  \\ {{:pasted:20220222-144747.png}}\\  \\
nas-bittorrent.1732735387.txt.gz · Last modified: 2024/11/27 19:23 by hogwild