Differences

This shows you the differences between two versions of the page.

--- nas-bittorrent [2023/06/04 18:04] – -condense, formatting hogwild
+++ nas-bittorrent [2023/06/04 18:32] (current) – -condense, formatting hogwild
@@ Line 7: / Line 7: @@
 {{:pasted:20220222-124628.png}}
- \\
+ \\ **Enable:**  Selecting this and clicking Save immediately runs the Transmission process and starts the Transmission process at every boot.\\  \\  \\
-**Enable:**  Selecting this and clicking Save immediately runs the Transmission process and starts the Transmission process at every boot.\\  \\  \\
 {{:pasted:20220222-124844.png}}
@@ Line 66: / Line 64: @@
 **Upload queuing:**  This settings specifies how many active uploads can run simultaneously.\\
-===== Advanced Settings  =====
+===== Advanced Settings =====
 {{:pasted:20220222-143604.png}}\\  \\
 **Find more peers using:**  This defines the types of Torrent networks in which Transmission will participate, and using which protocols.  \\ It is recommended to be selective with these settings. Some protocols don't function well through a VPN. Others must be disabled when using private peering. You are advised to consult the official [[nas-bittorrent|Transmission]] documentation and perhaps also the generic Torrent protocol documentation.\\
+ \\
 {{:pasted:20220222-143953.png}}\\  \\
@@ Line 87: / Line 87: @@
 **Save settings location:**  Here you define the preferred filesystem location where the settings file will be saved. \\ To save NVRAM space, most settings are saved in a file read directly by Transmission.
-  * Download directory -
+  * Download directory - Choosing this stores settings in the Download folder, described above
-  * JFFS -
+  * JFFS - Selecting this stores settings in [[admin-jffs2|JFFS]] storage that you have already defined.
-  * CIFS1 -
+  * CIFS1 - Choosing this stores settings on the first [[admin-cifs|CIFS]] share you've already defined.
-  * RAM -
+  * RAM - Choosing this stores settings in RAM. This will not survive a reboot.
+  * Custom -  \\
-Custom -  \\
  \\
@@ Line 98: / Line 97: @@
 {{:pasted:20220222-144747.png}}\\  \\
-**Blocklist**:  Transmission comes with a blocking capability built-in. You can define here the IP Blocklist of choice (usually Level 1). These are publicly-maintained lists of "bad" IP addresses, like monitoring servers and robots which undermine privacy.
+**Blocklist:**  Transmission includes a built-in blocking feature. Here, you specify a URL to the IP Blocklist of your choice (usually Level 1).  \\ IP blacklists are publicly-maintained lists of "bad" Torrent addresses, like monitoring servers and robots that undermine privacy.
-An alternative method to define the single list here is to use P2Partisan instead. Using P2Partisan, more lists can be defined. However, to use P2Partisan, a manual script installation is required.
+An alternative method you can use is to define the Blocklist in this field to use P2Partisan instead. Using P2Partisan, more lists can be defined. However, to use P2Partisan, you must manually install a script. More details can be found here:  [[ https://www.linksysinfo.org/index.php?threads/p2partisan-v5-16-v6-16-mass-ip-blocking-peerblock-peerguardian-for-tomato.69128/|Linksysinfo.org: P2Partisan]]
-**Custom Log File Path**:  Define here the location where you want Transmission to log its activity.
+**Custom Log File Path:**  Here, you define the location where you want Transmission to log its activity.
-**Custom Configuration**:  Please refer to the official Transmission documentation for additional detail on what it could/should be defined in this field.
+**Custom Configuration:**  For details on what to define in this field, please refer to the official Transmission documentation.
+ \\
+ \\

FreshTomato Wiki

User Tools

Site Tools

Differences

Page Tools