Site Tools


nas-ups

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
nas-ups [2023/06/21 02:58] – [UPS Monitor] -resize screenshot to 746x746 hogwildnas-ups [2024/08/28 01:45] (current) – [UPS Monitor] -condense hogwild
Line 1: Line 1:
 ====== UPS Monitor ====== ====== UPS Monitor ======
  
-This menu is divided in two sections, the APC UPS Status table and APC UPS Response strings. UPS monitoring is only available for APC uninterruptible power supplies with USB connection compatible with APC’s smart protocol library. The UPS Monitor library is included by default only in the Mega-VPN and AIO// //builds.+The UPS Monitor menu has settings and information to allow you monitor your Uninterruptible Power Supply. 
 + 
 +The menu is divided in two sections, the APC UPS Status table and APC UPS Response strings. UPS monitoring is only available for APC UPSes with USB connection compatible with APC’s smart protocol library. The UPS Monitor library is included only in the Mega-VPN and AIO// //builds.
  
 For more details, see: [[https://networkupstools.org/protocols/apcsmart.html]] For more details, see: [[https://networkupstools.org/protocols/apcsmart.html]]
- 
-To establish a successful connection, first enable //USB 1.1 support (OHCI) //and// //enable the //Run APCUPSD Daemon// in the [[usb_support|USB Support]] menu. 
  
  \\  \\
  
-{{UPS_Monitoring_configuration.jpg?746}}+To establish a connection, first enable //USB 1.1 support (OHCI) //and// //enable the //Run APCUPSD Daemon// option in the [[nas-usb|USB Support]] menu. 
 + 
 + \\ {{UPS_Monitoring_configuration.jpg?746}}
  
  \\  \\
Line 52: Line 54:
 ===== UPS Monitor Notes and Troubleshooting ===== ===== UPS Monitor Notes and Troubleshooting =====
  
-===== Daemon Log Entries =====+==== Daemon Log Entries ====
  
-A good way to debug issues with the UPS daemon is to check the Logs menu for entries indicating successful startup.+A good way to debug issues with the UPS daemon is to check the Logs menu for entries that indicate successful startup.
  
  \\ For example, see the last entry shown on this Logs screen:  \\ For example, see the last entry shown on this Logs screen:
Line 60: Line 62:
  \\ {{:ups_monitoring_log.jpg?746}}  \\ {{:ups_monitoring_log.jpg?746}}
  
- \\+ \\  \\ The last log entry shown here indicates that the apcupsd daemon started without problems.
  
  \\  \\
nas-ups.1687312701.txt.gz · Last modified: 2023/06/21 02:58 by hogwild