Differences

This shows you the differences between two versions of the page.

--- router_to_router_ssh [2023/05/23 17:57] – [Example] - resize screenshot: "20210921-152542.png" to 736x59 hogwild
+++ router_to_router_ssh [2023/05/24 02:08] (current) – [Notes] -changed subhead to "Passwordless Router-to-Router SSH Notes" hogwild
@@ Line 11: / Line 11: @@
   * As seen below, for switching wireless radio(s) on or off on a schedule (not shown).
- \\
+=====  Setting up/Establishing a Tunnel =====
 Follow these steps to generate a Keypair and establish an SSH tunnel:
@@ Line 25: / Line 25: @@
-===== Example =====
+===== Usage Example =====
 This example will enable/disable the eth1 5Ghz WiFi interface on the secondary router. (Temperature is shown only when the interface is enabled).  \\  \\
   - This screenshot shows the status display of the Primary router before before the command is run: \\ \\ {{:pasted:20210921-152542.png?736}} \\ \\
-  - Now, we run the command (//ssh root@192.168.10.1 radio toggle 1//): \\ \\ {{:pasted:20210921-152607.png}} \\
+  - Now, we run the command (//ssh root@192.168.10.1 radio toggle 1//): \\ \\ {{:pasted:20210921-152607.png?744}} \\ \\
-  - This shows the status display after the command is run: \\ \\ {{:pasted:20210921-152637.png}} \\  \\ If the same command is repeated, the eth1 interface will be disabled on the primary router.
+  - This shows the status display after the command is run: \\ \\ {{:pasted:20210921-152637.png?761}} \\  \\ Since "radio toggle 1" is  a toggle switch, if the same command is repeated, the eth1 interface will be disabled on the primary router.
+\\
+ \\
-===== Notes =====
+===== Passwordless Router-to-Router SSH Notes =====
   * The SSH daemon must be enabled on both routers.

FreshTomato Wiki

User Tools

Site Tools

Differences

Page Tools