Differences

This shows you the differences between two versions of the page.

--- status-overview [2024/10/28 22:29] – [Ethernet Ports State] -Replace screenshot with: "status-overview-ethenet_ports_state-2024.3.png" @ 755x135 hogwild
+++ status-overview [2024/11/01 20:40] (current) – [Wireless (2.4 GHz / ethx) and Wireless (5 GHz/ethy)]-Formatting hogwild
@@ Line 14: / Line 14: @@
 ===== Ethernet Ports State =====
-Here, icons are shown that represent the Ethernet ports. The LED colours represent link speeds: \\  \\ <fc #4682b4>BLUE</fc>  = 1Gbps\\ <fc #00ff00>GREEN</fc> = 100Mbps\\ <fc #f0e68c>AMBER</fc> = 10Mbps  \\   \\  \\
+Here, icons are shown that represent the Ethernet ports. The LED colours represent link speeds: \\  \\ <fc #4682b4>  BLUE</fc> = 1Gbps\\ <fc #00ff00>GREEN</fc> = 100Mbps\\ <fc #f0e68c>AMBER</fc> = 10Mbps  \\   \\  \\
 The inner part of each Ethernet icon turns:\\ Grey for Half-Duplex\\ Black for Full-Duplex
-\\ NOTE: The blinking LED colour matches the link speed. However, the LEDs flashing interval is fixed.\\ It doesn't represent the amount of network activity. \\  \\  \\ {{::status-overview-ethenet_ports_state-2024.3.png?755}}
+\\ NOTE: The blinking LED colour matches the link speed. However, the LEDs flashing interval is fixed.\\ It doesn't represent the amount of network activity. \\  \\  \\ {{::status-overview-ethenet_ports_state-2024.3.png?679}}
  \\ Clicking the **%%>>%% Configure** button will take you to the [[basic-network|Network]] menu, where you can configure settings for the \\ Ethernet Ports State display.
@@ Line 71: / Line 71: @@
  \\ \\ [[https://wiki.freshtomato.org/lib/exe/detail.php?id=overview&media=pasted:20200520-151221.png|{{:pasted:20200520-151221.png}}]]
-\\ **Enable:**  Clicking this turns on the WiFi radio shown under that heading.
+\\ **Enable:**  clicking this turns on the WiFi radio shown under that heading.
 This button appears only on some hardware.
@@ Line 77: / Line 77: @@
  \\
-**Disable:**  Turns off the WiFi radio under that heading, disconnecting clients.
+**Disable:**  turns off the WiFi radio under that heading, disconnecting clients.
 This appears only on some hardware.
@@ Line 83: / Line 83: @@
  \\
-**Stop:**  Clicking this stops sampling data used to update the **Overview** page.
+**Stop:**  clicking this stops sampling data used to update the **Overview** page.
  \\
-Selecting an interval rate from the menu and clicking **Refresh** will begin displaying data on the page again. Data are refreshed according to the setting selected in the Refresh menu.
+Choosing an interval rate from the menu and clicking **Refresh** will begin displaying data again. Data are refreshed according to the setting chosen in the Refresh menu.
  \\

FreshTomato Wiki

User Tools

Site Tools

Differences

Page Tools