Differences

This shows you the differences between two versions of the page.

--- tools-wol [2023/06/06 17:59] – [Wake on LAN] -condense, formatting hogwild
+++ tools-wol [2024/11/06 23:29] (current) – [Wake on LAN Notes and Troubleshooting] hogwild
@@ Line 1: / Line 1: @@
 ====== Wake on LAN ======
-This function allows you a send a Wake-on-LAN signal (or "magic packet") to wired network devices to wake them or power them on.  Wake on LAN is generally not supported by wireless devices.
+This function lets you a send a Wake-on-LAN signal ("magic packet") to wired network devices to wake them/power them on.  Wake-on-LAN is generally not supported by wireless devices. \\   \\   \\ {{:pasted:20200524-104525.png?760}}  \\   \\  \\
 The list of devices on this menu includes:
+ \\
+ \\
   * Devices already active in the ARP table.
-  * Devices defined in a static DHCP assignment.
+  * Devices defined in a DHCP Reservation/Static DHCP assignment.
-  * Devices defined manually in the //Dnsmaq Custom configuration//  field in the Advanced/DHCP/DNS/menu. \\ For example: ''dhcp-host=70:EE:50:37:E8:46,myhostnamein''
+  * Devices defined manually in the //Dnsmaq Custom configuration//  field \\ in the [[advanced-dhcpdns|DHCP/DNS/TFTP]] menu. \\ For example: ''dhcp-host=70:EE:50:37:E8:46,myhostnamein''
- \\ Some devices might appear on this menu without their hostname defined/displayed. You can work around this by defining them manually in the //Dnsmasq Custom configuration//  field, as described above.
+ \\ Some devices may appear with no defined hostname. You can define one in the //Dnsmasq Custom configuration// field as a workaround.
-\\ There are two ways to send a magic packet to a device on your network:
+\\  \\
-  - Click anywhere in the list on the device you want to wake. The **Wake Up** button briefly will grey out, then return.  \\ This indicates a magic packet was just sent to that device's MAC address. \\
-  - Type the desired MAC addresses of the devices to wake into the **MAC Address List** box, and then click **Wake Up**. \\  Note that the **Wake Up** button also serves to save the contents of the **MAC Address List** box to be remembered for future use.
- \\ {{:pasted:20200524-104525.png?760}}
- \\
+There are two ways to send a magic packet to a network device:
  \\
+ \\
+  - Click anywhere in the list on the device to wake. The **Wake Up**\\ button briefly will grey out, then return. This indicates a magic packet \\ was just sent to that device's MAC address. \\
+  - Type the desired MAC addresses to wake into the **MAC Address List** box, \\ and then click **Wake Up**. Note that the **Wake Up** button also serves to save\\ the contents of the **MAC Address List** box for future use.
 ===== Wake on LAN Notes and Troubleshooting =====
-For Wake On LAN to work on your client device, it must be configured to respond to magic packets, both in firmware and in software.  Enabling the firmware option causes the device's Ethernet chip to remain powered on (usually at a low state, like 10 Mbps) even when the device is sleeping or off. This makes it able to listen for magic packets.  Enabling the software option allows the device to wake up or power on when that packet is received.
+For WoL to work, client devices must be configured to respond to magic packets, both in firmware and software.  Enabling the firmware option causes the device's Ethernet chip to remain powered on even when the device is sleeping/off. This allows it to listen for magic packets.  Enabling the software option allows the device to wake up/power on when that packet is received.
-Most PCs have a Wake-on-LAN option that must be enabled in the UEFI or BIOS, named something like:
+ \\
+Most PCs have a Wake-on-LAN option to enable in UEFI/BIOS, named something like:  \\   \\
   * Power on by PCI-E or PCI   (Asus UEFI)
@@ Line 35: / Line 35: @@
  \\
-In terms of software, you must also enable the Wake on LAN settings in your PC operating system.
+You must also enable the WoL settings in your operating system.
-For details, see:
+For details, see:\\
+ \\
+[[https://www.howtogeek.com/70374/how-to-geek-explains-what-is-wake-on-lan-and-how-do-i-enable-it/|HOWTOGEEK explains what is Wake on LAN and How Do I Enable it?]]
-[[https://www.howtogeek.com/70374/how-to-geek-explains-what-is-wake-on-lan-and-how-do-i-enable-it/]]
+[[https://docs.microsoft.com/en-us/troubleshoot/windows-client/deployment/wake-on-lan-feature|Microsoft Docs: WoL Behaviour in Windows 10]]
-[[https://docs.microsoft.com/en-us/troubleshoot/windows-client/deployment/wake-on-lan-feature]]
 [[https://wiki.debian.org/WakeOnLan]]
+ \\
+ \\

FreshTomato Wiki

User Tools

Site Tools

Differences

Page Tools