In this menu you can configure Simple Network Management Protocol settings in FreshTomato.

SNMP is a simple protocol used for network monitoring and management. It collects and organizes information about managed devices on TCP/IP networks, and allows you to modify that information to change device behavior.

SNMP has a simple client-server architecture. In SNMP, servers (called “managers”) collect and process information about network devices.

In SNMP, the clients, (called “agents”), are any type of device or component connected to the network. That can include computers, but also other network equipment, phones, IoT devices, and more.

SNMP collects management data from the various clients and exposes it in the form of variables in a Management Information Base (MIB). The MIB describes the system status and configuration of each device. MIB variables can then be remotely queried (and sometimes manipulated) by managing applications.

Enable SNMP: Checking this enables the SNMP service.

Port:

Remote Access:

Allowed Remote IP Address:

Location:

Contact:

RO Community: