In this menu you can configure Simple Network Management Protocol settings in FreshTomato.

SNMP is a simple protocol used for network monitoring and management. It collects and organizes information about devices on TCP/IP-based networks, and can even allow you to modify that information to change device behavior.

SNMP has a simple client-server architecture. In SNMP, servers (called “managers”) collect and process information about network devices. Typically, the manager software runs on a PC or server. Clients are called “agents”. Agents run on any type of device which supports them, connected to a TCP/IP network. This can include computers, network equipment, and many other devices types, such as phones, IoT devices, and more.

SNMP collects management data from the various clients via a regular polling process. It exposes the data in the form of variables in a database, called the Management Information Base (MIB). The MIB describes the system status and configuration of each device. MIB variables can then be remotely queried (and sometimes manipulated) by managing applications.

Enable SNMP: Checking this enables the SNMP service, causing it to start collecting data.

Port: Here, enter the port on which the Manager will poll data from the monitored devices. (Default: 161).

Remote Access: Checking this allows Remote Access of ?

Allowed Remote IP Address: In this field, enter the IP address of the PC or other device that is allowed Remote Access.

Location: In this optional field, you can enter the physical location of the Server. (Default: hostname from Identification menu).

Contact: In this optional field, you can enter contact information for a person to be alerted.

RO Community: This Read-Only Community password is used to authorize the devices allowed to query the MIB database.