Differences

This shows you the differences between two versions of the page.

--- ipt-24 [2023/05/21 15:49] – -copy avg, max, unit, display, color, reverse from ip-daily hogwild
+++ ipt-24 [2024/11/06 22:53] (current) – [IP Traffic - Last 24 Hours] -Condense hogwild
@@ Line 1: / Line 1: @@
-====== Last 24 Hours ======
+====== IP Traffic - Last 24 Hours ======
-The IP Traffic/Last 24 Hours page displays bandwidth used on //selected //network IP addresses/ranges during the last 24 hours. It does not collect all bandwidth usage based on a specific FreshTomato interface. That is the purpose of the //Bandwidth///[[:bwm-24|Last 24 Hours]] function.
+The IP Traffic - Last 24 Hours menu displays bandwidth used on //selected //network IP addresses/ranges during the last 24 hours. Do not confuse this with the //Bandwidth///[[:bwm-24|Last 24 Hours]] function.
+ \\ \\ {{:299c6bc71fedfa913c910bf4f8e2a4ab.png?774}}  \\
  \\ **IPs currently on graphic:** allows you to select from which IP addresses/ranges you want to display bandwidth data.
-**Hidden Addresses:** On this menu, you can select IP addresses whose bandwidth is currently not being displayed on the graph to be measured/graphed.
+ \\
-The graph has a 24 hour window with a 2-minute interval. That means a maximum of 24 hours of bandwidth data are displayed, which are refreshed a maximum of every 2 minutes.
+**Hidden Addresses:** lets you select IP addresses whose bandwidth currently isn't displayed to be measured/graphed.
+The graph has a 24-hour window with 2-minute interval. A maximum of 24 hours of data display, refreshed at most every 2 minutes.
+ \\
 **RX** numbers show incoming bandwidth (to the LAN).
+ \\
 **TX** numbers show outgoing bandwidth (to the WAN).
-**Configure:** Clicking on this button will take you to the //Administration///[[:admin-bwm|Bandwidth Monitor]] page. There, you can enable and disable bandwidth monitoring, and configure settings bandwidth monitoring settings.
+ \\
-\\  \\ [[https://wiki.freshtomato.org/lib/exe/detail.php?id=ip-last_24_hours&media=299c6bc71fedfa913c910bf4f8e2a4ab.png|{{:299c6bc71fedfa913c910bf4f8e2a4ab.png?774}}]]
+**Hours: **
- \\  \\
+ \\
-\\ **Avg.** This applies a percentile to the image. This shows how a data point compares to the total distribution over time.
+**Avg:**  applies a percentile to the image. It shows how a data point compares to the total distribution over time.
+ \\
 **Max:**
-  * Uniform - Choosing this scales graphs to the maximum value recorded on all interfaces.
+  * uniform - choosing this scales graphs to the maximum value recorded on all interfaces.
-  * Per If (Per Interface) - Choosing this scales graphs based on data from one interface only.
+  * per If (Per Interface) - choosing this scales graphs based on data from one interface only.
+ \\
 **Unit: **
-  * kbit/KB - This toggles between displaying volume in kilobits/Kilobytes (1,000).
+  * kbit/KB - this toggles between displaying volume in kilobits/Kilobytes (1,000).
-  * Mbit/MB:This toggles the display to volume to be expressed in megabits/Megabytes (1,000,000).
+  * Mbit/MB - this toggles the display to volume to be expressed in megabits/Megabytes (1,000,000).
+ \\
 **Display: **
-  * Solid - Choosing this option graphs bandwidth usage with a solid area.
+  * Solid - choosing this graphs bandwidth usage with a solid area.
-  * Line - Choosing this option graphs bandwidth using a single line representing maximum values.
+  * Line - graphs bandwidth using a single line to represent maximum values.
-**Color**: Thus switches between various pre-specified color schemes for the graph.
+ \\
-**[reverse]** : This reverses the graph's color scheme. For example, a device traced in blue is traced in orange and vice versa.\\  \\  \\  [[https://wiki.freshtomato.org/lib/exe/detail.php?id=real-time&media=pasted:20200520-162850.png|{{:pasted:20200520-162850.png?729}}]]
+**Color:**  switches between various pre-specified color schemes for the graph.
+**[reverse]:**  reverses the graph's color scheme. For example, a device traced in blue is traced in orange and vice versa.
  \\
-//Cursor-Tracking Readout: //Bandwidth graphs feature a a //Cursor-Tracking Readout//. When you move your mouse cursor over the graph, the graph displays the following at the top right corner:
+**Configure:** clicking this takes you to [[admin-iptraffic|IP Traffic Monitoring]]. There, you can enable/disable IP Traffic monitoring, and configure settings.
+ \\
+==== General Features ====
+//Cursor-Tracking Readout: //Bandwidth graphs feature a a //Cursor-Tracking Readout//.
+When you mouse over the graph, the graph displays the following at the top right corner:
   * Day of Week
   * Time
   * Bandwidth usage.
+ \\
 These update as you move your mouse.
@@ Line 51: / Line 79: @@
 The Cursor-Tracking Readout disappears after 5 intervals: that is, 10 seconds in //Real-Time//, 10 minutes in //Last 24 Hours//, and so on.
-//Mouse-Click Readout//: Bandwidth graphs also feature a //Mouse-Click Readout//: If you click on the graph, the date/time/bandwidth numbers will display beside the mouse cursor.
+ \\
+//Mouse-Click Readout//: Bandwidth graphs also have a Mouse-Click Readout: If you click on the graph, the date/time/bandwidth numbers display beside the mouse cursor. This readout is static. It does not update with graph movement or scaling.
+ \\
+ \\
-Note: Mouse-click readout is static. It does not update with graph movement or scaling.

FreshTomato Wiki

User Tools

Site Tools

Differences

Page Tools