IP Traffic - Last 24 Hours

The IP Traffic - Last 24 Hours menu displays bandwidth used on selected network IP addresses/ranges during the last 24 hours. Do not confuse this with the Bandwidth/Last 24 Hours function.

IPs currently on graphic: allows you to select from which IP addresses/ranges you want to display bandwidth data.

Hidden Addresses: lets you select IP addresses whose bandwidth currently isn't displayed to be measured/graphed.

The graph has a 24-hour window with 2-minute interval. A maximum of 24 hours of data display, refreshed at most every 2 minutes.

RX numbers show incoming bandwidth (to the LAN).

TX numbers show outgoing bandwidth (to the WAN).

Hours:

Avg: applies a percentile to the image. It shows how a data point compares to the total distribution over time.

Max:

• uniform - choosing this scales graphs to the maximum value recorded on all interfaces.
• per If (Per Interface) - choosing this scales graphs based on data from one interface only.

Unit:

• kbit/KB - this toggles between displaying volume in kilobits/Kilobytes (1,000).
• Mbit/MB - this toggles the display to volume to be expressed in megabits/Megabytes (1,000,000).

Display:

• Solid - choosing this graphs bandwidth usage with a solid area.
• Line - graphs bandwidth using a single line to represent maximum values.

Color: switches between various pre-specified color schemes for the graph.

[reverse]: reverses the graph's color scheme. For example, a device traced in blue is traced in orange and vice versa.

Configure: clicking this takes you to IP Traffic Monitoring. There, you can enable/disable IP Traffic monitoring, and configure settings.

Cursor-Tracking Readout: Bandwidth graphs feature a a Cursor-Tracking Readout.

When you mouse over the graph, the graph displays the following at the top right corner:

• Day of Week
• Time
• Bandwidth usage.

These update as you move your mouse.

The Cursor-Tracking Readout disappears after 5 intervals: that is, 10 seconds in Real-Time, 10 minutes in Last 24 Hours, and so on.

Mouse-Click Readout: Bandwidth graphs also have a Mouse-Click Readout: If you click on the graph, the date/time/bandwidth numbers display beside the mouse cursor. This readout is static. It does not update with graph movement or scaling.