Differences

This shows you the differences between two versions of the page.

--- bwm-realtime [2024/09/24 03:04] – -Formatting hogwild
+++ bwm-realtime [2024/11/06 22:44] (current) – [Bandwidth - Real-Time] hogwild
@@ Line 2: / Line 2: @@
 The Bandwidth - Real-Time menu shows live monitoring of any router interface in graph form.  Data are reset when the page first loads((
-Though there is not data to "reset" when page first loads, it is reset on each subsequent [re]loads
+Though there is no data to "reset" when page first loads, it is reset on each subsequent [re]loads
 )), and the display draws gradually.
@@ Line 11: / Line 11: @@
  \\
-The maximum display window is 10 minutes, with data resolution of 2 seconds. Thus, 10 minutes of data can be displayed at a time, and that data is sampled at most, every 2 seconds.
+The maximum display window is 10 minutes, with 2-second data resolution. Ten minutes of data can be displayed at a time, with data sampled at most, every 2 seconds.
 Only one interface can be displayed at a time. Clicking on the interface name in any square displays the bandwidth of that interface.
@@ Line 17: / Line 17: @@
 The interfaces available to be monitored depend on your hardware and configuration (for example, using a VPN or VWLAN interface).
-\\ Some possible FreshTomato interfaces are (depending on firmware release/mode):
+\\ Some possible FreshTomato interfaces are (depending on release/mode):
   * **vlan2:**  The wired WAN port on the router
@@ Line 27: / Line 27: @@
 \\ **Avg.** applies a percentile to the image. This shows how a data point compares to the total distribution over time.
+ \\
 **Max:**
@@ Line 32: / Line 34: @@
   * Uniform - this scales graphs to the maximum value recorded on all interfaces.
   * Per If (Per Interface) - this scales graphs based on data from one interface only.
+ \\
 **Unit: **
@@ Line 37: / Line 41: @@
   * kbit/KB - toggles between displaying volume in kilobits/Kilobytes (1,000).
   * Mbit/MB: toggles display volume to be expressed in megabits/Megabytes (1,000,000).
+  * \\
 **Display: **
@@ Line 42: / Line 47: @@
   * Solid - graphs bandwidth usage with a solid area.
   * Line - graphs bandwidth using a single line representing maximum values.
+  * \\
 **Color**: switches between various pre-specified color schemes for the graph.
+ \\
 **[reverse]** : reverses the graph's color scheme. A device traced in blue is traced in orange and vice versa.\\  \\
+==== General Features ====
 //Cursor-Tracking Readout: //Bandwidth graphs have a a //Cursor-Tracking Readout//. Moving your mouse cursor over the graph causes it to display the following at the top right:
@@ Line 59: / Line 70: @@
 The //Cursor-Tracking Readout// disappears after 5 intervals: that is, 10 seconds in //Real-Time//, 10 minutes in //Last 24 Hours//, and so on.
-//Mouse-Click Readout//: Bandwidth graphs also have a //Mouse-Click Readout//: Clicking on the graph will make the date/time/bandwidth numbers display beside the mouse cursor.
+ \\
-Mouse-click readout is static. It does not update with graph movement or scaling.
+//Mouse-Click Readout//: Bandwidth graphs also have a //Mouse-Click Readout//: Clicking on the graph will make the date/time/bandwidth numbers display beside the mouse cursor. This function is static. It does not update with graph movement or scaling.
  \\

FreshTomato Wiki

User Tools

Site Tools

Differences

Page Tools