Differences

This shows you the differences between two versions of the page.

--- retain_dhcp_lease_info_after_a_reboot [2024/10/31 21:23] – [Method 1: Store the lease database on permanent storage] hogwild
+++ retain_dhcp_lease_info_after_a_reboot [2024/10/31 21:32] (current) – [Method 1: Store the lease database on permanent storage] hogwild
@@ Line 16: / Line 16: @@
 </code> \\
   - Use a path relative to your own system.  Click Save. \\ \\
-  - Using permanent storage means clients will retain connectivity if the router reboots.\\ Because the lease database isn't stored in RAM, rebooting won't erase it. \\ This can be useful when devices are connected to a switch. \\ \\ As well, clients won't display in the [[status-devices|Device List]] as having an active lease \\ until their current lease expires, and they've requested a new one. \\ FreshTomato will just continue where if left off. \\ \\
+  - Using permanent storage lets clients maintain connectivity after router reboots.\\ Because the lease database isn't stored in RAM, rebooting won't erase it. \\ This can be useful when devices are connected to a switch. \\ \\ As well, clients in the [[status-devices|Device List]] won't show as having an active lease \\ until their current lease expires, and they've requested a new one. \\ FreshTomato will just continue where if left off. \\ \\
-  - Notice that the example points to a USB device named "usb". \\ Yours might have a different name, depending on how storage was formatted. \\ This also means you can store the data on other permanent media, \\ like a CIFS share. However, for such configurations, it isn't wise \\ to use JFFS. JFFS isn't recommended for frequent writes (which in this case, would occur every time a new IP is sent).
+  - Notice that the example points to a USB device named "usb". \\ Yours may have a different name, depending on how storage was formatted. \\ This also means you can store the data on other permanent media, such as \\ a CIFS share.  \\ \\ However, for such configurations, it's not wise to use JFFS. JFFS is not\\ recommended for frequent writes (which, in this case, would occur every \\ time a new IP is sent).
 ===== Method 2: Copying the lease database to permanent storage at halt time =====
-\\ The second approach is to keep the lease database in its default location and copy it to permanent storage at "halt" time. It is later restored when the init process runs during boot.
+The second approach keeps the lease database in its default location and copies it to permanent storage at "halt" time. It is later restored when the init process runs during boot.
  \\ \\ For example, in the Init field in the [[admin-scripts|Scripts]] menu, enter:\\

FreshTomato Wiki

User Tools

Site Tools

Differences

Page Tools