Site Tools


hardware_compatibility

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
hardware_compatibility [2025/03/15 18:28] – Simplify columns and add # of LAN ports to all listings roguescholarhardware_compatibility [2025/03/31 21:50] (current) pedro
Line 124: Line 124:
 | Netgear \\ **WNR3500**  |  v2  |  MIPS R2  |  453Mhz ×1  |  1GbE ×4  |  ‒ / ‒  |  N300  |  3.5MB  |  32KB  |  32MB  |  K26 (SDK5.10)  | Due to hard-coded JFFS2 partition, flash storage is ≲ 3,473KB; FreshTomato 2020.x MiniIPv6 image is the only one that fits.  | | Netgear \\ **WNR3500**  |  v2  |  MIPS R2  |  453Mhz ×1  |  1GbE ×4  |  ‒ / ‒  |  N300  |  3.5MB  |  32KB  |  32MB  |  K26 (SDK5.10)  | Due to hard-coded JFFS2 partition, flash storage is ≲ 3,473KB; FreshTomato 2020.x MiniIPv6 image is the only one that fits.  |
 | Netgear \\ **WNR3500L**  |  v1  |  MIPS R2  |  453Mhz ×1  |  1GbE ×4  |  1 / ‒  |  N300  |  8MB  |  32KB  |  64MB  |  K26 (SDK5.10)  | **Only enable JFFS on the FreshTomato Mini images, otherwise your** <typo bg: #002d38; fc: #819500; ff: monospace; fs: 14px; lh: 1.0; sp: nowrap; va: text-bottom;>board_data</typo> **partition is overwritten**. \\ \\ Images must be ≲ 7,475KB. ([[https://www.linksysinfo.org/index.php?threads/big-vpn-23-3-problem-on-wnr3500l.78067/#post-343373|forum thread]])  | | Netgear \\ **WNR3500L**  |  v1  |  MIPS R2  |  453Mhz ×1  |  1GbE ×4  |  1 / ‒  |  N300  |  8MB  |  32KB  |  64MB  |  K26 (SDK5.10)  | **Only enable JFFS on the FreshTomato Mini images, otherwise your** <typo bg: #002d38; fc: #819500; ff: monospace; fs: 14px; lh: 1.0; sp: nowrap; va: text-bottom;>board_data</typo> **partition is overwritten**. \\ \\ Images must be ≲ 7,475KB. ([[https://www.linksysinfo.org/index.php?threads/big-vpn-23-3-problem-on-wnr3500l.78067/#post-343373|forum thread]])  |
-| Netgear \\ **WNR3500L**  |  v2  |  MIPS R2  |  480Mhz ×1  |  1GbE ×4  |  1 / ‒  |  N300  |  32MB  |  32KB  |  128MB  |  K26RT-N (SDK5.110)  | Only install images with names ending in <typo bg: #002d38; fc: #819500; ff: monospace; fs: 14px; lh: 1.0; sp: nowrap; va: text-bottom;>…Netgear‑3500Lv2‑K26USB_RT‑N5x‑XXX</typo> (AIO or VPN).  |+| Netgear \\ **WNR3500L**  |  v2  |  MIPS R2  |  480Mhz ×1  |  1GbE ×4  |  1 / ‒  |  N300  |  32MB  |  32KB  |  128MB  |  K26RT-N (SDK5.110)  | Only install images with names ending in <typo bg: #002d38; fc: #819500; ff: monospace; fs: 14px; lh: 1.0; sp: nowrap; va: text-bottom;>…Netgear‑K26MIPSR2_RTN-USB-XXX</typo> (AIO or VPN).  |
 | Netgear \\ **WNDR3400**  |  v1  |  MIPS R2  |  480Mhz ×1  |  100MbE ×4  |  1 / ‒  |  N600  |  8MB  |  64KB  |  64MB  |  K26RT-N (SDK5.110)  |   | | Netgear \\ **WNDR3400**  |  v1  |  MIPS R2  |  480Mhz ×1  |  100MbE ×4  |  1 / ‒  |  N600  |  8MB  |  64KB  |  64MB  |  K26RT-N (SDK5.110)  |   |
 | Netgear \\ **WNDR3400**  |  v2 / v3  |  MIPS R2  |  530Mhz ×1  |  100MbE ×4  |  1 / ‒  |  N600  |  8MB  |  64KB  |  64MB  |  K26RT-N (SDK5.110)  | [[https://www.linksysinfo.org/index.php?threads/w-i-p-wndr3400v2-development.77559/post-337553|Forum thread]]  | | Netgear \\ **WNDR3400**  |  v2 / v3  |  MIPS R2  |  530Mhz ×1  |  100MbE ×4  |  1 / ‒  |  N600  |  8MB  |  64KB  |  64MB  |  K26RT-N (SDK5.110)  | [[https://www.linksysinfo.org/index.php?threads/w-i-p-wndr3400v2-development.77559/post-337553|Forum thread]]  |
hardware_compatibility.txt · Last modified: 2025/03/31 21:50 by pedro