User Tools
Sidebar
enable_disable_ethernet_port
This is an old revision of the document!
You can enable/disable specific LAN ports via command line as follow.
To identify the port use the command
''robocfg show port''
Once the physical port is identified, to disable:
<bbCodeCode>
robocfg port x state disabled
</bbCodeCode>
TO enable instead:
<bbCodeCode>
robocfg port x state enabled
</bbCodeCode>
where x is the port number involved
enable_disable_ethernet_port.1601377883.txt.gz · Last modified: 2020/09/29 12:11 by rs232
